直线运动滚动导轨副混合润滑研究

综合考虑了直线运动导轨副接触几何、预紧力、真实表面粗糙度、曲率系数等因素,建立了直线运动导轨副混合润滑数值模型,研究了滑块移动速度、曲率半径系数、工作载荷、表面粗糙度对导轨接触副润滑特性的影响,得到结论:导轨副法向工作载荷、最大赫兹接触压力和赫兹接触半径随着外加总载荷的增大而增大,平均膜厚随着载荷的增大而减小;混合润滑模型可预测导轨副在大范围工况条件下完整的润滑状态;直线运动导轨大多工作在混合润滑状态下,随着滑块移动速度的增加,接触界面由边界润滑状态向混合润滑状态转变,润滑性能逐渐提高;适当增加曲率半径系数,有利于润滑油膜的形成与稳定。     

应用变频器技术实现SO2风机节能改造

铜目前,硫酸车间制酸一系列共有三台SO2风机,这三台风机均采用液力耦合器的调速方式,这种方式可以实现无极调速,但是存在着传动效率低,耗能大的缺点,并且这三台风机均已使用20年以上,处于设备的中晚期,工作效率已大大降低。目前行业内,均采用先进的变频调速方式。使用变频器来控制风机的转速,可以极大的节省电能,尤其是在低负荷情况下,可以实现低转速运转,大大提高硫酸系统的综合能耗指标。     

Telesurgery QoS improvement over SDN based on a Type‐2 fuzzy system and enhanced cuckoo optimization algorithm

Telemedicine is a new area based on the information and communication technology for collecting, storing, organizing, retrieving and exchanging medical information. One of the most important applications of telemedicine is indeed telesurgery in which an efficient telecommunication infrastructure between the surgery room and remote surgeons need to be established. One of the most important issues to be tackled in telesurgery is to find favorable links for routing as well as providing high Quality of Service (QoS). In this paper, an efficient model based on the hybridization of Type‐2 Fuzzy System (T2FS) and Cuckoo Optimization Algorithm (COA) over the Software Defined Networks (SDN) is proposed in order to achieve optimal and reliable routes for telesurgery application. Using T2FS, the fitness of the links is determined; then, a COA is conducted over the Constraint Shortest Path (CSP) problem to find the best routes. Delay is considered as a CSP problem which is satisfied by trying to find the paths with minimum cost. Due to the NP‐completeness of the CSP problem, an Enhanced COA (so‐called E‐COA) is proposed and utilized as a metaheuristic solver. To the best of our knowledge, this paper is the first SDN‐based communication model that applies both T2FS and E‐COA for assigning proper costs to the network's links, and solves the consequence CSP problem according to the QoS requirement for telesurgery. The model also recognizes and preserves the second‐best routes in order to keep the reliability for such a critical application. In addition to the simulations, the performance evaluation is also conducted on a real experimental scenario. Many comparisons are carried out between the proposed model and other conventional methods, and the evaluation study shows the superiority of the proposed model on all the three QoS‐related metrics, i.e. average end‐to‐end delay, packet loss ratio and PSNR.     

响应面曲线法优化贵州某磷块岩浮选工艺研究

对贵州某沉积钙质磷块岩进行了浮选工艺研究。采用H₂SO₄为氟磷灰石抑制剂、BW-1为白云石捕收剂,进行了浮选单因素试验; 在此基础上进行了正交试验,并采用响应面曲线法进行了浮选条件优化。确定了最佳浮选条件为: 磨矿细度-0.074 mm粒级占60%、H₂SO₄用量13.20 kg/t和BW-1用量400 g/t。采用一段反浮选试验流程,可得到精矿品位30.94%、回收率92.45%的磷精矿。研究结果表明,磨矿细度与H₂SO₄用量的交互作用对精矿品位影响显著,H₂SO₄用量和BW-1用量的交互作用对精矿回收率影响显著。     

臭氧氧化-循环喷淋法处理钨钼选矿废水

采用臭氧氧化-循环喷淋法去除钨钼选矿废水中COD,研究了pH值、臭氧流量、循环频率对COD去除效果的影响。结果表明: 废水COD去除率随pH值、臭氧流量、循环频率增大而增加,在pH值为10、臭氧流量3.0 L/min、循环频率4.0次/min条件下,氧化120 min后废水COD含量由131 mg/L降至11.5 mg/L,COD去除率达91.2%,满足《污水综合排放标准》(GB 8978-1996)一级标准。与O₂、NaClO处理废水COD的对比试验结果表明,循环喷淋法结合O₃表现出较好的COD去除效果。     

Cross‐Linked Fluorinated Poly(Aryl Ether) (C‐FPAE) Films: Preparation Strategy,Performance Study,and Low Dielectric Applications

The production of low dielectric materials that can be used in high temperature environments is the primary aim of this work. A cross‐linked structure is introduced into fluorinated poly(aryl ether) (named as FPAE) with high molecular weight (M_w, 140 000 g mol^?1) and linear molecular structure using nucleophilic substitution reaction at the ortho‐position of decafluorobiphenyl monomer units in the FPAE molecular chain. The curing temperature and curing time are optimized and the final conditions for the cross‐linking reaction in this study are determined to be 300 °C for 1 h. Moreover, the dielectric constant and dielectric loss of the C‐FPAE film respectively are 2.67 and 0.006 at 1000 Hz when 1 wt% of crosslinking agent is added, and the cross‐linked fluorinated poly(aryl ether) film shows excellent thermal stability (T_d(5%), 495 °C), dimensional stability, hydrophobic properties, and high storage modulus in high temperature environments. Such novel low dielectric material with excellent performances has important application value in the aerospace and the integrated electronics field.     

Gui-A-Gra Attenuates Testicular Dysfunction in Varicocele-Induced Rats via Oxidative Stress,ER Stress and Mitochondrial Apoptosis Pathway

Gui-A-Gra, a commercial insect powder from Gryllus bimaculatus, is registered as an edible insect by the Korean food and drug administration. The aim of this study was to investigate the effect of Gui-A-Gra on testicular damage induced by experimental left varicocele in male Sprague Dawley rats. A total of 72 rats were randomly divided into the following six groups (12 rats in each group): a normal control group (CTR), a group administrated with Gui-A-Gra 1.63 gm/kg (G1.63), a group administrated with Gui-A-Gra 6.5 gm/kg (G6.5), a varicocele (VC)-induced control group (VC), a VC-induced group administrated with Gui-A-Gra 1.63 gm/kg (VC + G1.63), and a VC-induced group administrated with Gui-A-Gra 6.5 gm/kg (VC + G6.5). Rats were administrated 1.63 or 6.5 gm/kg Gui-A-Gra once daily for 42 days. Indicators of sperm parameters, histopathology, reproductive hormones, oxidative stress, endoplasmic reticulum (ER) stress, inflammation, and mitochondrial apoptosis were analyzed to evaluate effects of Gui-A-Gra on VC-induced testicular dysfunction. Gui-A-Gra administration to VC-induced rats significantly (p < 0.05) increased sperm count and sperm motility, Johnsen score, spermatogenic cell density, serum testosterone, testicular superoxide dismutase (SOD), glutathione peroxidase (GPx), catalase, GPx4, and steroidogenic acute regulatory protein (StAR) level. Moreover, pretreatment with Gui-A-Gra significantly (p < 0.05) decreased terminal deoxynucleotidyl transferase-mediated dUTP nick-end labeling (TUNEL) positive cells/tubules, serum luteinizing hormone (LH), serum follicle-stimulating hormone (FSH), testicular tumor necrosis factor-α (TNF-α), interleukin-6 (IL-6), malondialdehyde (MDA), reactive oxygen species (ROS)/reactive nitrogen species (RNS) level, glucose-regulated protein-78 (Grp-78), phosphorylated c-Jun-N-terminal kinase (p-JNK), phosphorylated inositol-requiring transmembrane kinase/endoribonuclease 1α (p-IRE1α), cleaved caspase-3, and BCL2 associated X protein: B-cell lymphoma 2 (Bax: Bcl2) ratio in VC rats. These results suggest that protective effects of Gui-A-Gra on VC-induced testicular injury might be due to its antioxidant, anti-inflammatory, and androgenic activities that might be mediated via crosstalk of oxidative stress, ER stress, and mitochondrial apoptosis pathway.     

响应面法优化鹿茸胶原蛋白制备抗氧化肽的水解条件

以鹿茸中下段胶原蛋白为酶解底物，用木瓜蛋白酶酶解制备小分子抗氧化肽，以清除1,1-二苯基-2-苦基肼基(DPPH?)自由基的能力为指标，采用响应面法优化酶水解条件。结果表明，最优实验条件为时间56 min，酶添加量1.40wt%，pH=5.60，温度60℃。该条件下所得抗氧化肽对DPPH?自由基的清除率为83.09%。用超滤膜、半制备色谱柱和超高效液相色谱?质谱联用仪分级分离获得分子量0.2?0.6 kDa的具有最高抗氧化活性的多肽，其具有与头段类似的保健功效，更易被人体吸收，且易进一步加工和储存。     

环氧树脂涂层表面亲水性对微藻黏附性能的影响

在固体材料表面黏附成膜是微藻细胞的一种生理特性。近些年基于微藻生物膜的生物过程，如生物膜贴壁培养和防附着技术受到了很多关注。微藻在固体材料表面的黏附受藻细胞与材料表面之间的相互作用的影响，建立黏附强度与材料表面性质参数间的关系对于通过材料选择来强化或控制微藻生物膜具有非常重要的意义。本工作的目的是揭示和明确材料亲疏水性对微藻黏附的影响，提出了一种双酚A环氧(EP)树脂表面亲疏水改性的方法。通过将亲水性的二乙醇胺(DEA)或疏水性的聚甲基聚硅氧烷(PMHS)加入到EP树脂中反应，EP树脂表面水接触角在36.80?~98.34?范围内可通过加入不同量的DEA或PMHS实现任意可调，材料的表面水接触角与DEA或PMHS加入量之间有线性关系。重要的是这种改性方法获得的材料，其形貌、结构、表面粗糙度等表面性质几乎没有变化，从而在研究和关联微藻黏附量与材料表面亲疏水性(表面水接触角)之间的关系时可以排除亲疏水性之外的其他表面性质的影响；其次，考察了小球藻和栅藻在不同亲疏水性材料表面的黏附行为，结果表明小球藻和栅藻在亲水性和疏水性材料表面均能黏附成膜，但在亲水性材料表面黏附更多更快；建立了微藻最大黏附容量与材料表面接触角之间关联关系，表明微藻最大黏附容量随材料表面水接触角的增大而线性降低，栅藻的表面黏附容量比小球藻大。     

纳米铁的绿色合成及其在环境中的应用研究进展

纳米铁（零价铁及铁氧化物）比表面积大、还原能力强、反应活性高，是一种良好的环境功能材料。传统的纳米铁合成方法中，物理方法对反应所需仪器设备要求较高，化学方法使用的还原剂具有毒性，绿色合成方法能够有效克服传统方法的不足之处。本文首先根据合成途径、纳米铁的类型介绍了利用植物和微生物对纳米零价铁（nZVI）及纳米铁氧化物（IONPs）进行绿色合成的方法，同时论述了制备的纳米铁所表现的特征（如形貌、尺寸、聚集倾向、等电位点）。随后总结了纳米铁通过不同反应机制（吸附、还原、催化氧化）去除环境有机、无机污染物（染料、芳香族化合物、硝酸盐、重金属）的应用。最后指出了纳米铁在绿色合成与实际应用过程中存在的挑战性问题及解决方法，以期为纳米铁今后的深入研究和大规模的工业生产应用提供参考依据。